ATS SIMPLY

Merry Christmas And Happy New Year For All

In the last issue we have talked in details about the Reliance Controls transfer switch and its importance in power backup system ( Part I ). In this part we will discuss the installation and operating instructions of Reliance Controls Transfer Kit Model 3006 HDK in details using illustrated figures and videos.      

About Generators And Transfer Switches Generators and transfer switches are dependent on one another as a system to power your home in a power out situation. The Reliance Controls transfer switch system is needed because 1) your portable generator is very powerful and the power it creates must be safely controlled to protect you and your electric utility provider, and 2) even with all of its power, your generator probably cannot power all of the electrical circuits and devices in your home without help from a transfer switch with load management capabilities.

Happy New Year For All Enjoy The New Look Of  ATS SIMPLY  

TRANSFER SWITCH BASICS What is a transfer switch as used with a standby generator and your home? Well, the simple answer is that it isolates the generator from the home’s electric utility service and vice versa. Without a transfer switch, the only way to tie a generator into your home’s electrical system is to perform the very dangerous and likely illegal act of “backfeeding”.

In this article we will try to find accurate answers of some important questions about generator transfer switch.

      A transfer switch between your electrical meter and your home allows you to use a generator or alternative energy source to provide current to your house in the event of a power failure. Transfer switches are either automatic, meaning you do not have to turn them on when the power fails, or manual. Manual switches must be turned from alternating current power to the generator when the electricity is out. Both automatic and manual switches are installed in similar ways and require electrical knowledge to install correctly and safely. If you do not feel like you have the proper knowledge, it is always better to consult a professional.

         Owning a generator for your home means you might be interested in transfer switches. The following questions and answers should provide you with some key knowledge on the subject.

      Transfer switches connect homes and other buildings to a different power supply. Usually this occurs when the public power supply fails, and a transfer switch connects instead to a local generator. This transfer can be manual or automatic, and both methods can encounter problems. Transfer switches connect buildings to a different power supply.

       When there is a power outage, you are left in the dark unless you have a back-up generator and transfer switch.  This is a device that lets you power chosen household AC circuits either from the power company or from a generator. When there is a power outage, you just start up your generator, flip a switch, and start powering your appliances with generator power. Here are the basics on how to install a 30 amp transfer switch. Remember there are many brands of transfer switches and each one is a little different. The basic principle is similar in most of them however.

           When the electrical power goes out in your residence, you usually can tolerate a couple hours of darkness, warmth, or cold conditions until it resumes. But if your business experiences a electrical power blackout, it might turn tragic, particularly when its critical operations depend on nonstop electric power supply. This exact scenario is the reason why several entities, like medical clinics, data processing facilities, and even commercial merchants have emergency support power generators. Yet just owning a backup generator doesn't necessarily mean that you're ready for a power disruption. For you to be ready, you need to guarantee that your power generator is reached by using an automatic transfer switch and not a manually operated one.

     Power generator's transfer switch upkeep to a knowledgeable emergency electricity equipment provider. Each time a company does upkeep on your transfer switch, it will need to conduct the following basic steps:

          A power transfer switch is needed if you want to switch from a primary power source to a secondary or tertiary power source. It is also employed in many electrical power distribution systems across the world. You can see transfer switches in areas where there are emergency power generators used as backup power for utility source.

    If you are experiencing frequent power outages in your area, or that your area is susceptible to severe weather,   generator transfer switches   can help you safely power your home or business. This power-supplying device can provide comfort, safety and security during power outages and emergencies, and can be installed temporarily during these situations. It must be connected properly to protect electrical utility workers, family members and property. Improper connection of the device and the power-switching device could void your homeowner's insurance in case of accident or injury. Improper connections also allow electrical current from the generator to short circuit with utility line current when powered is restored. This can cause a fire in the electrical system. 

     Due to the needs of electrical shifts, the automatic transfer switch has been developed. Switches are the things that connect the operator from the equipment he is operating. Often this also enables the operator to declare if energy is available or not.  This is because this minute device has the capacity to break or divert circuit and it can also decide whether preset or not, unto which energy supplier will the electricity come from. The electromechanical type is the most common form of this device, which is connected to one or more electrical contacts. The contacts can be either closed or open. When closed, the contacts are touching and electricity is flowing freely between them whereas open contacts are not at all connected to each other and are not producing energy.

If you've been putting off conducting maintenance checks, you could be doing more damage than you think. An automatic transfer switch (ATS) is a critical part of any emergency power supply system (EPSS). The ATS is the device that selects a power source—either normal utility power or standby generator power—and conducts the power to critical loads. The NFPA, Joint Commission on Accreditation of Healthcare Organizations (JCAHO), and all major ATS manufacturers publish literature calling for the monthly test of ATSs, yet many facility owners ignore these guidelines and refuse to perform the tests. There are good reasons for both the monthly-test requirement and for the reluctance of many operators to comply.

 Poor heat dissipation from control transformer leads to fire in transfer   switch . After a fire broke out in a hospital's 1000A automatic transfer switch (ATS), everyone involved was left searching for answers. Again and again, the same question was asked: Why would a fire start in a switch that operated without noticeable incident for several years? The answer: poor heat transfer.

               For more than 50 years, Tensolite, St. Augustine, Fla., has been the world leader in the design and manufacture of custom high-tech wire. NASA, Boeing, and the military rely on Tensolite to provide light, high-speed cable and wire to transfer critical data. Prior to 1994, Florida Power & Light (FPL) served Tensolite, a 1.2MW user, by one substation 10 miles away. Furthermore, pine trees surrounded the distribution lines to the company. With such a precarious electrical setup, it's no wonder Tensolite averaged 50 to 60 outages a year.

Practical tips for understanding and installing these devices in residential applications As backup power sources become more common in residential construction (Photo 1), many homeowners have learned about the needs and benefits of transfer switches. They know in the event of an electric utility power supply outage it is at the very least desirable to power up selected circuits in a service entrance panel to provide limited light, heat, and refrigeration. Having the option of operating a double-throw switch — or sitting back and doing nothing while the switch operates on its own — is a very appealing and safe option.

         A circuit transfer switch kit is an important electrical switch that is used to switch from one power source to another. The alternative power sources can be multiple. One example of an alternative power source is a generator. When the main power source fails, the circuit transfer switch switches from the main power source to the alternative power source. This action can be done automatically or manually, depending on the type of transfer switched installed. Here are instructions on how to install a circuit transfer switch kit.